Eliminate Flash Rust problem:
Eliminate Flash Rust problem from Metal Finishing Process
In traditional way of cleaning and pre-treatment of metal, different hazardous
and toxic chemicals are used. After the cleaning is complete, because of in
between rinsing with water, the rust starts forming immediately (flash rust).
Even if a rust inhibitor or phosphate coating is applied on the metal surface
after rinsing, a thin film of micro-rust has already formed on the surface,
which stays underneath and will grow later on, making the life of the finish
top coat shorter. In case of PICKLEX®, the metal parts are cleaned
and coated at the same time and does not allow any rust or oxidation to form
on the surface.
CONTACT US FOR MORE INFORMATION
Picklex.com
© Copyright 1997-2004, International Chemical Products, Inc.
|
